Re: [cobalt-users] consoled on ttyS0??

[Marco Baurdoux <linux@xxxxxxxxxxxxx>]

Hi dave,

This bit comes straight from a RaQ3 manual:

"You can connect a console terminal to the DB-9 connector on the back panel
of the RaQ3. The terminal can be either an ASCII terminal or a PC running
terminal software. The console terminal should have the following
communications parameters - 9600 Bauds, 8 dat bits, no parity and one stop
bit "

Page 143 of the manual.
Now I don't know what it's like on a Cube 3 but you might want to give it a
try with these parameters, otherwise try consulting your manual :-))



le 17.8.2001 14:22, Dave Brillhart à Dave.Brillhart@xxxxxxx a écrit :

> There is a process running on my Qube 3:
> 
> root ... /sbin/consoled /sbin/getty ttyS0 115200
> 
> Any idea how to attach to this thing? I've tried to tip to
> the serial port? I've tried straight and null modem
> serial cables and various combinations of speeds and
> handshakes. Nothing on the port at all. Not even garbage
> characters.
> 
> What's the trick?
> 
> Thanks!
> 
> -- Dave
> 
> 
> 
> 
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users

=======================================================================

Marco Baurdoux
Unix Administrator
Infomaniak Network SA
Avenue de la Praille 26
1227 Carouge
Switzerland
Tel: +41 (0)22 820 35 41
Fax: +41 (0)22 820 35 46
http://web.infomaniak.ch

=======================================================================