[cobalt-users] Dead RaQ1, Stuck at Enable Swap Space

["Robert Spurlock" <rspurlock@xxxxxxxxxxxx>]

I have a RaQ1, was booting just fine, until now.  Upon a restart, it
stops at "enable swap space" and just stops there.  No disk activity,
LED's or anything.  I can hit CTRL-Z at this point and it continues
on to:
Initializing random number generator...
INIT: Entering runlevel: 3

Then dies again.  Below is the full boot info.  If anyone has any
suggestions, they would be greatly appreciated.

Rob Spurlock
Lock-Net Internet Services

Begin Info Here::::
Loading R4000 MMU routines.
CPU revision is: 00002810
Primary ICACHE 16K (linesize 32 bytes)
Primary DCACHE 16K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 149.91 BogoMIPS
Memory: 128036k/131068k available (988k kernel code, 2044k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initialized

Checking for 'wait' instruction...  available.
Linux version 2.0.34C52_SK (root@xxxxxxxxxxxxxxxxxxxx) (gcc version
2.7.2) #1 Tue Nov 30 18:14:40 PST 1999
Starting kswapd v 1.5 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
ide: Cobalt Networks IDE controller.
GAL CFG[00000001-->00000003]
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
    ide1: BM-DMA at 0x1000cc08-0x1000cc0f
hda: QUANTUM FIREBALL EL10.2A, 9787MB w/418kB Cache, CHS=19885/16/63,
UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
eth0: Digital DS21143 Tulip rev 65 at 0x10100000, 00:10:E0:00:0E:3D,
IRQ 4.
eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3)
block.
eth0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.

INIT: version 2.71 booting

Activating swap partitions
Adding Swap: 130748k swap-space (priority -1)
hostname: nessie.mpfree.com
Checking root filesystems.
Parallelizing fsck version 1.10 (24-Apr-97)
[/sbin/fsck.ext2] fsck.ext2 -a -y /dev/hda1 
e2fsck 1.10, 24-Apr-97 for EXT2 FS 0.5b, 95/08/09
/dev/hda1 was not cleanly unmounted, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/hda1: 18891/76912 files (17.1% non-contiguous), 306595/307439
blocks
Checking root filesystem quotas
Turning on user and group quotas for root filesystem
Remounting root filesystem in read-write mode.
mount: /proc already mounted or /proc busy
Finding module dependencies
Starting kerneld, version 2.1.121 (pid 31)
Checking filesystems.
Parallelizing fsck version 1.10 (24-Apr-97)
Checking all file systems.
----------------------------------
----------------------------------
[/sbin/fsck.ext2] fsck.ext2 -a -y /dev/hda3 
e2fsck 1.10, 24-Apr-97 for EXT2 FS 0.5b, 95/08/09
/dev/hda3: clean, 349/12880 files, 40768/51408 blocks
----------------------------------
[/sbin/fsck.ext2] fsck.ext2 -a -y /dev/hda4 
e2fsck 1.10, 24-Apr-97 for EXT2 FS 0.5b, 95/08/09
/dev/hda4: clean, 84363/2383872 files, 7552673/9528624 blocks
----------------------------------
Checking filesystem quotas
Scanning /dev/hda4 [/home] |

Checked 4612 directories and 79743 files
Using quotafile /home/quota.user
Mounting local filesystems.
Turning on user and group quotas for local filesystems
Setting clock: Sun May  6 17:56:54 EDT 2001
Enabling swap space.
Initializing random number generator...
INIT: Entering runlevel: 3
Lock-Net Internet
800-216-8006
Get Locked On, With Lock-Net!