Re: [cobalt-users] What cpu is in a cobalt raq4 - screaming lawsu its

[Rickard Osser <ricky@xxxxxxxx>]

> > Guys - just get the serial number or MAC address, contact Cobalt
> > and look up what kind of machines they were sold as. Simple as
> > that. You want to be darn sure before you start screaming lawsuit.
> > It's quite possible that the processor went bad on that box and
> > to save cost, they replaced it with a 300mhz rather than a 450mhz.
> > As for the second ethernet interface, it could just be disabled
> > if it isn't being used.
If the second ethernet port isn't used by the UI then it should show up
anyway, iregarlessly, becasue the driver is built into the kernel both
ethernet-interfaces are always setup and doing a "cat
/proc/net/dev" whousl always show 2 ethernet devices on the RaQ4 like on
my!

[root /root]# cat /proc/net/dev
Inter-|   Receive                                                |
Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
    lo:131401954 2012039    0    0    0     0          0         0
131401954 2012039    0    0    0     0       0          0
  eth0:276589986 1116653    0    0    0   629          0         0
53338052  207669    0    0    0 102119       4          0
  eth1:       0       0    0    0    0     0          0         0        0
0    0    0    0     0       0          0


Best regards,


Rickard Osser
Manager
-----------------------------------------------------------------------
|Osser Lindist AB		Distributor of Cobalt Networks servers|
-----------------------------------------------------------------------
|Osser Brosoft AB		Computer Consultants                  |
-----------------------------------------------------------------------
|Maria Bangata 6		S-118 63 Stockholm, Sweden 	      |
|Tel: +46-8-798 29 27		E-mail: ricky@xxxxxxxx		      |
|Fax: +46-8-668 89 10		http://www.lindist.com   	      |
-----------------------------------------------------------------------