Fw: [cobalt-users] RaQ3-en-System-3.0.5-6375.pkg - The Fix from Cobalt

["Fabian Eichmann" <admin@xxxxxxxxx>]

Hi folks

That's doesn't work :
> 3)  mknod -m 666 /dev/null o 1 3

That's right :
> 3)  mknod -m 666 /dev/null c 1 3

cu Fabian Eichmann
Eichmann-Networks

> ----- Original Message -----
> From: "john" <john@xxxxxxxxxxxxx>
> To: <cobalt-users@xxxxxxxxxxxxxxx>
> Sent: Wednesday, November 29, 2000 12:11 AM
> Subject: [cobalt-users] RaQ3-en-System-3.0.5-6375.pkg - The Fix from
Cobalt
>
>
> > Here's the fix I just got from Cobalt.
> > ......................................
> >
> > Here you go:
> >
> > To log into the box in single user mode do the following:
> >
> > 1)connect a serial null-modem cable to the first serial port of the raq
> and
> > your pc.  Using 115200, 8, N, 1, hardware flow control
> >
> > 2)just after the first text appears in your screen hit the space bar
> >
> > 3) type:  boot   (? to get help)
> >
> > 4)type:  set_params single
> >
> > 5)type:  bfd
> >
> >
> > On the prompt you then get issue the following commands:
> >
> > 1)  mount -o remount /
> >
> > 2)  rm -f /dev/null
> >
> > 3)  mknod -m 666 /dev/null o 1 3
> >
> > 4)  reboot
> >
> >
> > And everything should be OK again.
> >
> > Good Luck,
> >
> > John Masteller
> > Cobalt Technical Support Engineer
> >
> > _______________________________________________
> > cobalt-users mailing list
> > cobalt-users@xxxxxxxxxxxxxxx
> > To Subscribe or Unsubscribe, please go to:
> > http://list.cobalt.com/mailman/listinfo/cobalt-users
> >
>