[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[cobalt-users] 'We serve it, you surf it?'

Hello, we are trying to interpret these results from the "Console On"
feature output via the serial cable from a drive that keeps rebooting
during the Checking disk...* stage. When "unmounted" and put in a second
box, we run fsck /dev/hdb4 for the /home directory, we receive these
errors:

Nov 15 17:55:50 ns2 kernel: hdb: read_intr: status=0x59 { DriveReady
SeekComplet
e DataRequest Error }
Nov 15 17:55:50 ns2 kernel: hdb: read_intr: error=0x40 { UncorrectableError
}, L
BAsect=1288393, sector=169
Nov 15 17:55:50 ns2 kernel: end_request: I/O error, dev 03:44, sector
169
Nov 15 17:55:53 ns2 kernel: hdb: read_intr: status=0x59 { DriveReady
SeekComplet
e DataRequest Error }
Nov 15 17:55:53 ns2 kernel: hdb: read_intr: error=0x10 { SectorIdNotFound
}, LBA
sect=1288394, sector=170
Nov 15 17:55:57 ns2 kernel: hdb: read_intr: status=0x59 { DriveReady
SeekComplet
e DataRequest Error }
Nov 15 17:55:57 ns2 kernel: hdb: read_intr: error=0x10 { SectorIdNotFound
}, LBA
sect=1288394, sector=170
Nov 15 17:56:01 ns2 kernel: hdb: read_intr: status=0x59 { DriveReady
SeekComplet
e DataRequest Error }
Nov 15 17:56:01 ns2 kernel: hdb: read_intr: error=0x10 { SectorIdNotFound
}, LBA
sect=1288394, sector=170
Nov 15 17:56:04 ns2 kernel: hdb: read_intr: status=0x59 { DriveReady
SeekComplet
e DataRequest Error }
Nov 15 17:56:04 ns2 kernel: hdb: read_intr: error=0x10 { SectorIdNotFound
}, LBA
sect=1288394, sector=170
Nov 15 17:56:04 ns2 kernel: ide0: reset: success

These errors are repeated 4 times and then re-boots through the same
cycle repeatedly. Hda1 and Hda3 pass the fsck tests and are Ok. Is there
anyway to salvage the data on hda4 since we can mount the other partitions
via a second box?  The null cable output results are below to help with
possible diagnosis:

ìCobalt Microserver Diagnostics - 'We serve it, you surf it'

Built Fri Jun  11 14:07:25 PST 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................64M
 6.Bank 1:................................. 64M
 7.Bank 2:................................. 64M
 8.Bank 3:................................. 64M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER: trying to boot from partition /dev/hda1
Decompressing -\|/-\|/-\|/-\| done
Decompressing -/-\|/-\|/-\|/-\|/-\ done.
Loading R4000 MMU routines.
CPU revision is: 000028a0
Primary ICACHE 32K (linesize 32 bytes)
Primary DCACHE 32K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 249.86 BogoMIPS
Memory: 257212k/262140k available (1076k kernel code, 3852k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initializedChecking for 'wait' instruction...
 available.
Linux version 2.0.34C53_SK (root@xxxxxxxxxxxxxxxxxxxx) (gcc version 2.7.2)
#1 Tue May 9 14:57:21 PDT 2000
Starting kswapd v 1.5 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
ide: Cobalt Networks IDE controller.
GAL CFG[00000001-->00000003]
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
    ide1: BM-DMA at 0x1000cc08-0x1000cc0f
hda: ST330630A, 29188MB w/2048kB Cache, CHS=59303/16/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
eth0: Digital DS21143 Tulip rev 65 at 0x10100000, 00:xx:xx:00:xx:xx,
IRQ 4.
eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0x10101000, 00:10:E0:00:43:E0,
IRQ 13.
eth1: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth1:  EEPROM default media type Autosense.
eth1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth1:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1288394, sector=164
end_request: I/O error, dev 03:04, sector 164
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1288394, sector=166
end_request: I/O error, dev 03:04, sector 166
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1288394, sector=168
end_request: I/O error, dev 03:04, sector 168
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288395, sector=170
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288395, sector=170
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288395, sector=170
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288395, sector=170
hda: disabled DMA
ide0: reset: success
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error
}
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288394, sector=170
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error
}
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288394, sector=170
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error
}
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288394, sector=170
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error
}
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288394, sector=170
ide0: reset: success
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error
}
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=1288394, sector=170
end_request: I/O error, dev 03:04, sector 170 
Thanks in Advance,
-- 
James Hoaggs   ICQ #96365505
james_hoaggs@xxxxxxxxxx - email
(408) 380-2271 x8024 - voicemail/fax



__________________________________________________
FREE voicemail, email, and fax...all in one place.
Sign Up Now! http://www.onebox.com