RE: [cobalt-users] Function of second ethernet port on Raq3i

["Jimmy Gross" <jimmy@xxxxxxxxxxxxxxx>]

The Netopia R7100 is the model we use for our DSL lines. It has the same
functions as the R9100 and uses the same firmware. It is also less
expensive.

jimmy

-----Original Message-----
From: cobalt-users-admin@xxxxxxxxxxxxxxx
[mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]On Behalf Of Niels Schenk
Sent: Tuesday, August 08, 2000 11:59 PM
To: cobalt-users@xxxxxxxxxxxxxxx
Subject: Re: [cobalt-users] Function of second ethernet port on Raq3i


Hi Jimmy,

first of all thanks for the great offer.
I've got an adsl connection (256kbps and soon 512) and want to host virtual
domains on it. I did some searching myself and found that the Netopia R9100
is
suited for my needs, please correct me if I'm wrong.

Thanks in advance,

Niels Schenk


Jimmy Gross wrote:

> The hub/router would depend on your digital line (ie, ISDN, DSL, Frame
> Relay, T1, etc). Netopia and 3Com have several solutions. Most of the
> solutions these days are ethernet based so you would need a patch cable
> (straight through or crossed depending on the equipment. If you would like
> to contact me offlist with the type of line you have a will find a
solution
> for you and give you pricing as well. Thanks.
>
> jimmy
> jimmy@xxxxxxxxxxxxxxx
>
> -----Original Message-----
> From: cobalt-users-admin@xxxxxxxxxxxxxxx
> [mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]On Behalf Of Niels Schenk
> Sent: Tuesday, August 08, 2000 11:41 AM
> To: cobalt-users@xxxxxxxxxxxxxxx
> Subject: Re: [cobalt-users] Function of second ethernet port on Raq3i
>
> I know I'm getting a little of topic now, excuse me if this is not
> appropriate,
> but I'm going to try anyway.
> Can you advise me what kind of hub/router to buy and what kind of
> cable(connection).
>
> Jimmy Gross wrote:
>
> > The second ethernet port can be used to have the Raq3i on 2 separate
> > networks which different IP structures and subnets. Yes, you can set up
> your
> > Raq3 on a dedicated line and your local network. This would require a
> router
> > and hub (some routers these days have built in hubs).
> >
> > jimmy
> >
> > -----Original Message-----
> > From: cobalt-users-admin@xxxxxxxxxxxxxxx
> > [mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]On Behalf Of Niels Schenk
> > Sent: Tuesday, August 08, 2000 11:12 AM
> > To: Cobalt-Users
> > Subject: [cobalt-users] Function of second ethernet port on Raq3i
> >
> > Hi,
> >
> > I have got a question which may seem to be VERY stupid, but I can't help
> > myself, sorry for that :)
> > The Cobalt Raq 3i has got 2 ethernet ports while the Raq 3 has got one.
> > My question is if it's possible to hookup my Raq 3 server to a dedicated
> > line while it also is on my network. I am hoping that this is possible
> > via a hub, but I can't seem to find the answer that clears all my
> > doubts.
> >
> > Thanks in advance,
> >
> > Niels Schenk
> >
> > _______________________________________________
> > cobalt-users mailing list
> > cobalt-users@xxxxxxxxxxxxxxx
> > To Subscribe or Unsubscribe, please go to:
> > http://list.cobalt.com/mailman/listinfo/cobalt-users
> >
> > _______________________________________________
> > cobalt-users mailing list
> > cobalt-users@xxxxxxxxxxxxxxx
> > To Subscribe or Unsubscribe, please go to:
> > http://list.cobalt.com/mailman/listinfo/cobalt-users
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users


_______________________________________________
cobalt-users mailing list
cobalt-users@xxxxxxxxxxxxxxx
To Subscribe or Unsubscribe, please go to:
http://list.cobalt.com/mailman/listinfo/cobalt-users