Re: [cobalt-users] Is the Qube2 finicky about connectors?

[Mike Vanecek <nospam99@xxxxxxxxxxxx>]

On Thu, 22 Jun 2000 13:01:46 -0400, Richard Shuman <rshuman@xxxxxxxxxxxx>
wrote:

:>Hi,
:>
:>We've just gotten our Qube 2, and I can't seem to access it at all. I
:>tried changing the IP address of the Qube to XXX.XXX.XXX.1, so it would
:>"begin" the network, but I can't even ping it.
:>
:>When I plug in my DSL modem/router, the connector lights up to show
:>network connection. However, when I plug in the hub, or any of the other
:>cables that we've put together for our network, there are no lights. The
:>network works by itself, with the DSL M/R, just not the Qube. I can't
:>even ping it.

Be sure to check out the doco Stephen suggests, it is very helpful.

My settings are:


   Hostname   www
   Domain Name   domain.com
   Primary DNS Server Address   ns1.isp.net
   Secondary DNS Server Address  ns2.isp.net
   Default Gateway    isp.gateway.ip
   IP Forwarding   Yes

Primary Interface - eth0
   IP Address   192.168.1.1
   Subnet Mask   255.255.255.0
   Network Address Translation (NAT)   Yes
   MAC Address  supplied by the Qube2 

Interface Settings - Secondary Interface - eth1
    IP Address   static ip address assigned to you by the isp
   Subnet Mask   255.255.255.0
   MAC Address  supplied by the Qube2


First Workstation settings:
  IP Address 192.168.1.10
  Subnet Mask 255.255.255.0
  Gateway 192.168.1.1

HTH

Mike.



-- 

  For information on the unofficial qube mailing list, see
  http://majordomo.email-lists.com/qube-users/