[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[cobalt-users] Error restoring qube 3 from CD
- Subject: [cobalt-users] Error restoring qube 3 from CD
- From: "Jay Taylor" <lists@xxxxxxxxxxx>
- Date: Tue Apr 27 11:49:02 2004
- List-id: Mailing list for users to share thoughts on Sun Cobalt products. <cobalt-users.list.cobalt.com>
I've restored several (5 or so) qube 3's with this CD (v6.4) rom without a hitch and I'm having problems with a new qube 3 pro for some reason. I connected a serial cable to the qube3 and a PC and opened a terminal program to capture the output after setting console to "on" for the qube 3.
Thinking that there was a problem with one or both IDE drives, I pulled them and used seagate's disk test utility on them (they are seagate drives) and both passed just fine.
My options are to take two drives from a different Qube 3 and put in this box and try again or move the two drives from this box to another qube 3 and try restoring to that box and then move the drives back. That might be the easiest thing to do, but I'm still interested in why the restore is failing for this box.
I'm not entirely sure how to read the error file below, but it looks like a package failed to load. The 05_Qube3-All-Security-2.0.1-8061.pkg to be specific. What would be some causes to have this package fail to load?
Any help is most appreciated.
Jay
Output from console port on Qube 3
-----
Running script crackdict
45373 45373
Running script mknetrcscripts
Running script lgtoclnt-postinstall.sh
Networker has not yet been installed
Networker has not yet been installed
Networker has not yet been installed
Running script delete_sperl
Running script qube3_postinstall
Running script set_cmos_bootdev
Cleaning up the first time
Final cleanup
###################### NOTICE ########################
one or more errors occurred while installing
RPM packages to the system.
here's the logfile (/tmp/cobalt_error.log):
/bto-sync/production/4100WG_1.12/rpms/MAKEDEV-2.5.3-C1.noarch.rpm:
execution of MAKEDEV-2.5.3-C1 script failed, exit status 255
/bto-sync/production/4100WG_1.12/rpms/SysVinit-2.77-2C3.i386.rpm:
execution of SysVinit-2.77-2C3 script failed, exit status 255
/bto-sync/production/4100WG_1.12/rpms/info-4.0-5.i386.rpm:
execution of info-4.0-5 script failed, exit status 255
/bto-sync/production/4100WG_1.12/rpms/texinfo-4.0-5.i386.rpm:
execution of texinfo-4.0-5 script failed, exit status 255
/bto-sync/production/4100WG_1.12/rpms/grep-2.4-4.i386.rpm:
execution of grep-2.4-4 script failed, exit status 255
/bto-sync/production/4100WG_1.12/rpms/frontpage-4.0-3.i386.rpm:
/var/tmp/rpm-tmp.96236: /usr/bin/strip: No such file or directory
execution of frontpage-4.0-3 script failed, exit status 126
/bto-sync/production/4100WG_1.12/rpms/netatalk-1.4b2+asun2.1.4-pre39.i386.rpm:
error reading information on service atalk: No such file or directory
warning: The DDP services appear to be present in /etc/services.
warning: Please check them against services.atalk in the documentation.
/bto-sync/production/4100WG_1.12/rpms/InterBaseCS_LI-V6.0-1.i386.rpm:
cannot get shared lock on database
rpmQuery: rpmdbOpen() failed
######################################################
Error log
Done 04/27 16:23:12
BEGIN: 16:06:56 END: 16:23:13
Loading MFG hook
Creating .master files if needed
Created /etc/resolv.conf.master
Created /etc/sysconfig/network.master
Created /etc/sysconfig/network-scripts/ifcfg-eth0.master
eth0 Link encap:Ethernet HWaddr 00:10:E0:04:DA:EF
inet addr:10.0.0.150 Bcast:10.255.255.255 Mask:255.0.0.0
Found Broadcast(10.255.255.255) and Netmask(255.0.0.0)!
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:255607 errors:0 dropped:0 overruns:0 frame:0
TX packets:210441 errors:61467 dropped:27 overruns:0 carrier:0
collisions:110695
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0
Found Network(10.0.0.0)!
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
Contents of /mntdir/etc/resolv.conf:
search mfg.cobaltmicro.com
nameserver 10.0.0.254
Contents of /mntdir/etc/sysconfig/network:
NETWORKING=yes
FORWARD_IPV4=no
HOSTNAME=lease150.mfg.cobaltmicro.com
GATEWAYDEV=eth0
GATEWAY=
Contents of /mntdir/etc/HOSTNAME:
lease150.mfg.cobaltmicro.com
Contents of /mntdir/etc/NET-CONFIG:
BOOTPROTO=lcd
Contents of /mntdir/etc/sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0
ONBOOT=yes
IPADDR=10.0.0.150
NETWORK=10.0.0.0
NETMASK=255.0.0.0
BROADCAST=10.255.255.255
Writing Updates to the disk:
01_Qube3-en-Mfg-0.0.2-9690.pkg
02_Qube3-en-Update-1.0.3BTO.pkg
03_Qube3-en-Update-2.0.8-cache-raid.pkg
04_Qube3-All-System-1.0.1-9819.pkg
05_Qube3-All-Security-2.0.1-8061.pkg
06_Qube3-ml-Update-4.0.pkg
07_Qube3-en-Manual-1.2.pkg
08_Qube3-fr-Manual-1.2.pkg
09_Qube3-es-Manual-1.2.pkg
10_Qube3-de-Manual-1.2.pkg
11_Qube3-ja-Manual-1.2.pkg
12_Qube3-zh_CN-Manual-1.2.pkg
13_Qube3-zh_TW-Manual-1.2.pkg
Writing Bundles to the disk:
INIT: Switching to runlevel: 6
INIT: Sending processeSending all processes the TERM signal...
INIT: no more processes left in this runlevel
Sending all procmd: serializing resync, md6 has overlapping physical units with
md4!
esses the KILL s raid1d(248) flushing signals.
ignal..
raid1d(234) flushing signals.
raid1d(213) flushing signals.
raid1d(192) flushing signals.
raid1syncd(214) flushing signals.
raid1syncd(193) flushing signals.
md: recovery thread got woken up ...
md: recovery thread finished ...
mdrecoveryd(6) flushing signals.
Unmounting file systems
Remounting remaining filesystems (if any) readonly
SYSTEM REBOOTING
stopping all md devices.
MD: skipped 8 kernel messages
interrupting MD-thread pid 249
raid1: mirror resync was not fully finished, restarting next time.
md: updating md6 RAID superblock on device
hdc6 [events: 00000002](write) hdc6's sb offset: 131456
hda6 [events: 00000002](write) hda6's sb offset: 131456
.
md6 switched to read-only mode.
raid1: mirror resync was not fully finished, restarting next time.
md_do_sync() got signal ... exiting
md: updating md4 RAID superblock on device
hdc4 [events: 00000002](write) hdc4's sb offset: 17340544
hda4 [events: 00000002](write) hda4's sb offset: 17340544
.
md4 switched to read-only mode.
marking sb clean...
md: updating md3 RAID superblock on device
hdc3 [events: 00000002](write) hdc3's sb offset: 512000
hda3 [events: 00000002](write) hda3's sb offset: 512000
.
md3 switched to read-only mode.
marking sb clean...
md: updating md1 RAID superblock on device
hdc1 [events: 00000002](write) hdc1's sb offset: 1536064
hda1 [events: 00000002](write) hda1's sb offset: 1536064
.
md1 switched to read-only mode.
disabling network interfaces.
Restarting system.
Cobalt Networks, Inc. - Connecting the Dots
Firmware version 2.3.35
Current date: Apr 27 16:23:47 UTC 2004
ROM build info: Mon Oct 9 20:05:49 PDT 2000 war.cobalt.com
System serial number: XXXXX
Memory found: 128 MB
Initializing I2C bus: done
Scanning PCI bus: done
Initializing IDE: waiting to spinup second channel...done
IDE 0 master: found
IDE 1 master: found
Initializing SCSI: done
Initializing ethernet: 2 ethernet controllers installed - done
National Semiconductor DP83815 Found at port 0x6200, MAC: XXXXX
National Semiconductor DP83815 Found at port 0x6300, MAC: XXXXX
Initializing flash: done
Flash bank 0: AMD AM29F080B 1MB (1:d5)
Flash bank 1: not installed.
Initializing USB: done
Mounting rom_fs: done
Initializing i18n - language "en": done
Press spacebar to enter ROM mode
Booting default method - From disk
First stage kernel: Decompressing - done
Second stage kernel: Decompressing - done
Linux version 2.2.16C7 (root@freakshow) (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #1 Fri Sep 8 15:58:03 PDT 2000
Ignoring bogus EBDA pointer 3FFF000
Detected 448219 kHz processor.
Pending 0x00
Calibrating delay loop... 894.57 BogoMIPS
Memory: 127836k/131072k available (1220k kernel code, 412k reserved, 1544k data,
60k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 32K L1 D Cache: 32K
CPU: L2 Cache: 128K
CPU: AMD AMD-K6(tm)-III Processor stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Cobalt watchdog v1.3 enabled
Cobalt temperature sensor v1.2 enabled
Serial driver version 4.27 with<4>keyboard: Timeout - AT keyboard not present?
keyboard: Timeout - AT keyboard not present?
no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
lcd: Cobalt LCD Driver v3.10
serialnumber: read of address 0x6d returned 0x0
serialnumber: read of address 0x7d returned 0xf0
serialnumber: read of address 0x7e returned 0xe0
serialnumber: Version 1.5 initialized. Serial number=XXXXX. Copyright
(c) 1994-2000 Axent Technologies, Inc
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: 100% native mode on irq 14
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST320410A, ATA DISK drive
hdc: ST320410A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST320410A, 19092MB w/2048kB Cache, CHS=38792/16/63, UDMA(33)
hdc: ST320410A, 19092MB w/2048kB Cache, CHS=38792/16/63, UDMA(33)
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
translucent personality registered
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 830.580 MB/sec
p5_mmx : 733.044 MB/sec
8regs : 437.769 MB/sec
32regs : 254.889 MB/sec
using fastest function: pII_mmx (830.580 MB/sec)
sym53c8xx: at PCI bus 0, device 14, function 0
sym53c8xx: 53c875 detected
sym53c875-0: rev=0x04, base=0xa0001000, io_port=0x6100, irq=12
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xa0002000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
scsi : detected total.
eth0: National Semiconductor MacPhyter (dp83815)
eth0: bus=0 func=128 io=0x6200 irq=11 ver=3.2
eth0: ethernet addr=00:10:e0:04:da:ef
eth1: National Semiconductor MacPhyter (dp83815)
eth1: bus=0 func=144 io=0x6300 irq=10 ver=3.2
eth1: ethernet addr=00:10:e0:04:da:f0
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 < hda5 hda6 > hda3 hda4
hdc: hdc1 hdc2 < hdc5 hdc6 > hdc3 hdc4
autodetecting RAID arrays
(read) hda1's sb offset: 1536064 [events: 00000004]
(read) hda3's sb offset: 512000 [events: 00000004]
(read) hda4's sb offset: 17340544 [events: 00000004]
(read) hda5's sb offset: 30656 [events: 00000000]
md: invalid raid superblock magic on hda5
md: hda5 has invalid sb, not importing!
could not import hda5!
(read) hda6's sb offset: 131456 [events: 00000004]
(read) hdc1's sb offset: 1536064 [events: 00000004]
(read) hdc3's sb offset: 512000 [events: 00000004]
(read) hdc4's sb offset: 17340544 [events: 00000004]
(read) hdc5's sb offset: 30656 [events: 00000000]
md: invalid raid superblock magic on hdc5
md: hdc5 has invalid sb, not importing!
could not import hdc5!
(read) hdc6's sb offset: 131456 [events: 00000004]
autorun ...
considering hdc6 ...
adding hdc6 ...
adding hda6 ...
created md6
bind<hda6,1>
bind<hdc6,2>
running: <hdc6><hda6>
now!
hdc6's event counter: 00000004
hda6's event counter: 00000004
md: md6: raid array is not clean -- starting background reconstruction
md6: max total readahead window set to 128k
md6: 1 data-disks, max readahead per data-disk: 128k
raid1: device hdc6 operational as mirror 1
raid1: device hda6 operational as mirror 0
raid1: raid set md6 not clean; reconstructing mirrors
raid1: raid set md6 active with 2 out of 2 mirrors
md: updating md6 RAID superblock on device
hdc6 [events: 00000005](write) hdc6's sb offset: 131456
md: syncing RAID array md6
md: minimum _guaranteed_ reconstruction speed: 100 KB/sec.
md: using maximum available idle IO bandwith for reconstruction.
md: using 128k window.
hda6 [events: 00000005](write) hda6's sb offset: 131456
.
considering hdc4 ...
adding hdc4 ...
adding hda4 ...
created md4
bind<hda4,1>
bind<hdc4,2>
running: <hdc4><hda4>
now!
hdc4's event counter: 00000004
hda4's event counter: 00000004
md: md4: raid array is not clean -- starting background reconstruction
md4: max total readahead window set to 128k
md4: 1 data-disks, max readahead per data-disk: 128k
raid1: device hdc4 operational as mirror 1
raid1: device hda4 operational as mirror 0
raid1: raid set md4 not clean; reconstructing mirrors
raid1: raid set md4 active with 2 out of 2 mirrors
md: updating md4 RAID superblock on device
hdc4 [events: 00000005](write) hdc4's sb offset: 17340544
md: serializing resync, md4 has overlapping physical units with md6!
hda4 [events: 00000005](write) hda4's sb offset: 17340544
.
considering hdc3 ...
adding hdc3 ...
adding hda3 ...
created md3
bind<hda3,1>
bind<hdc3,2>
running: <hdc3><hda3>
now!
hdc3's event counter: 00000004
hda3's event counter: 00000004
md3: max total readahead window set to 128k
md3: 1 data-disks, max readahead per data-disk: 128k
raid1: device hdc3 operational as mirror 1
raid1: device hda3 operational as mirror 0
(checking disk 0)
(really checking disk 0)
(checking disk 1)
(really checking disk 1)
(checking disk 2)
(checking disk 3)
(checking disk 4)
(checking disk 5)
(checking disk 6)
(checking disk 7)
(checking disk 8)
(checking disk 9)
(checking disk 10)
(checking disk 11)
raid1: raid set md3 active with 2 out of 2 mirrors
md: updating md3 RAID superblock on device
hdc3 [events: 00000005](write) hdc3's sb offset: 512000
hda3 [events: 00000005](write) hda3's sb offset: 512000
.
considering hdc1 ...
adding hdc1 ...
adding hda1 ...
created md1
bind<hda1,1>
bind<hdc1,2>
running: <hdc1><hda1>
now!
hdc1's event counter: 00000004
hda1's event counter: 00000004
md1: max total readahead window set to 128k
md1: 1 data-disks, max readahead per data-disk: 128k
raid1: device hdc1 operational as mirror 1
raid1: device hda1 operational as mirror 0
(checking disk 0)
(really checking disk 0)
(checking disk 1)
(really checking disk 1)
(checking disk 2)
(checking disk 3)
(checking disk 4)
(checking disk 5)
(checking disk 6)
(checking disk 7)
(checking disk 8)
(checking disk 9)
(checking disk 10)
(checking disk 11)
raid1: raid set md1 active with 2 out of 2 mirrors
md: updating md1 RAID superblock on device
hdc1 [events: 00000005](write) hdc1's sb offset: 1536064
hda1 [events: 00000005](write) hda1's sb offset: 1536064
.
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
INIT: version 2.77 booting
Activating swap partitions Adding Swap: 131448k swap-space (priority -1)
Setting hostname lease150.mfg.cobaltmicro.com md6: blocksize changed
nr_blocks changed to 32 (blocksize 4096, j 64, max_blocks 32864)
Checking root filesystem
e2fsck 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
ext2fs_check_if_mount: No such file or directory while determining whether /dev/
md1 is mounted.
/dev/md1: clean, 32836/385024 files, 595986/1536064 blocks
ok
can't create lock file /etc/mtab~34: Read-only file system (use -n flag to overr
ide)
Remounting root filesystem in read-write mode
Finding module dependencies
Checking filesystems
e2fsck 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
/dev/md3: clean, 116/128016 files, 22001/512000 blocks
e2fsck 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
/dev/md4: clean, 1032/4335616 files, 699705/17340544 blocks
ok
Mounting local filesystems
Setting clock (utc): Tue Apr 27 09:25:29 PDT 2004 Tue Apr 27 09:25:29 PDT 2004
Enabling swap space
INIT: Entering runlevel: 3
Starting system logger: syslogd
Starting kernel logger: klogd
Starting quota /home/quota.user missing... rebuilding
/home/quota.group missing... rebuilding
Checking quotas. This may take some time.
Scanning /dev/md4 [/home] done
Checked 566 directories and 458 files
Using quotafile /home/quota.user
Using quotafile /home/quota.group
Done.
Turning on quota.
/dev/md4: group quotas turned on
/dev/md4: user quotas turned on
Starting cced: cced
Running CCE constructors:
Starting ipchains Loading ipchains rules: ok
Starting network Enabling IPv4 packet forwarding.
ifconfig lo 127.0.0.1 netmask 255.0.0.0 broadcast 127.255.255.255
myroutes:
127.0.0.0/255.0.0.0/0.0.0.0/lo/U
ifconfig eth0 10.0.0.150 netmask 255.0.0.0 broadcast 10.255.255.255
myroutes:
10.0.0.150/255.255.255.255/0.0.0.0/eth0/UH
Starting random Initializing random number generator...
Starting cron daemon: crond
Starting INET services: inetd
Starting nfsfs Mounting remote filesystems.
Starting admserv Starting admin web server: ahttpd
Starting httpd Setting up Web Service: httpd
Setting up Mail Service: sendmail
Starting AppleTalk services: (backgrounded)
Starting lcdsleep.init
Starting zzzDELETE_MEzzz Arch is i586, setting $LCD_WRITE to lcd-write
4100WG_1.12
13 updates to be loaded
Loading 01_Qube3-en-Mfg-0.0.2-9690.pkg
RUNNING sleep 15; /usr/sausalito/sbin/pkg_prepare.pl -i -f /tmp/01_Qube3-en-Mfg-
0.0.2-9690.pkg...
Installation successful.
Loading 02_Qube3-en-Update-1.0.3BTO.pkg
RUNNING sleep 15; /usr/sausalito/sbin/pkg_prepare.pl -i -R -f /tmp/02_Qube3-en-U
pdate-1.0.3BTO.pkg...
UnZipSFX 5.40 of 28 November 1998, by Info-ZIP (Zip-Bugs@xxxxxxxxxxxxx).
inflating: movefiles.pl
UnZipSFX 5.40 of 28 November 1998, by Info-ZIP (Zip-Bugs@xxxxxxxxxxxxx).
inflating: IbLinuxPatch
UnZipSFX 5.40 of 28 November 1998, by Info-ZIP (Zip-Bugs@xxxxxxxxxxxxx).
inflating: postgresql-7.0.2-2C1.i386.rpm
inflating: postgresql-devel-7.0.2-2C1.i386.rpm
inflating: postgresql-jdbc-7.0.2-2C1.i386.rpm
inflating: postgresql-odbc-7.0.2-2C1.i386.rpm
inflating: postgresql-perl-7.0.2-2C1.i386.rpm
inflating: postgresql-python-7.0.2-2C1.i386.rpm
inflating: postgresql-server-7.0.2-2C1.i386.rpm
inflating: postgresql-tcl-7.0.2-2C1.i386.rpm
inflating: postgresql-tcl-7.0.2-2C1.i386.rpm
inflating: postgresql-tk-7.0.2-2C1.i386.rpm
Can't exec "/Bin/rm": No such file or directory at /home/tmp/.swupdate/pkgunpack
.1256/scripts/pre-install/20_InstallPatch line 5.
error: failed dependencies:
libpq.so.2.0 is needed by php-4.0.1-C7q3
Cobalt-OS-v6.1: Error installing RPM: bind-8.2.3-C1.i386.rpm.
Loading 03_Qube3-en-Update-2.0.8-cache-raid.pkg
RUNNING sleep 15; /usr/sausalito/sbin/pkg_prepare.pl -i -R -f /tmp/03_Qube3-en-U
pdate-2.0.8-cache-raid.pkg...
/home/tmp/.swupdate/pkgunpack.2758/scripts/pre-install/script.sh
Use of uninitialized value at /usr/sausalito/perl/CCE.pm line 313, <GEN0> chunk
5.
Use of uninitialized value at /usr/sausalito/perl/CCE.pm line 173, <GEN0> chunk
5.
Installation successful.
Loading 04_Qube3-All-System-1.0.1-9819.pkg
RUNNING sleep 15; /usr/sausalito/sbin/pkg_prepare.pl -i -R -f /tmp/04_Qube3-All-
System-1.0.1-9819.pkg...
Installation successful.
Loading 05_Qube3-All-Security-2.0.1-8061.pkg
RUNNING sleep 15; /usr/sausalito/sbin/pkg_prepare.pl -i -R -f /tmp/05_Qube3-All-
Security-2.0.1-8061.pkg...
Error while loading package 05_Qube3-All-Security-2.0.1-8061.pkg!