[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[cobalt-users] RE: Raq2 Updates
- Subject: [cobalt-users] RE: Raq2 Updates
- From: "Thomas Fosbenner" <tom@xxxxxxxxxxx>
- Date: Thu Apr 13 05:04:49 2000
I also installed all of the updates and the most recent update gave me a
problem. We are an ISP and I did the update and it said I needed to reboot,
so I did. It took over 20 minutes for the raq to come back up? I have no
clue whats going on . Now I am afraid to reboot the raq again because I am
not sure if it will come back up again or not. I also am having some little
problems since the updates but I am not sure if it is related to the actual
updates or not.
Thomas Fosbenner
Sr. Systems Administrator
KTI LINK Internet Services
www.ktilink.com
> Joe Kerns [SMTP:joe@xxxxxxxxxxxxx] Wrote
> On: Monday, April 10, 2000 7:17 PM
> Anyone install the latest updates? Anything get screwed up by doin
> it?
> Thanks, Joe
>
> I have these updates on mine and it runs fine!
> All-Kernel_mips Release 1.0
> All-Kernel_mips_tools Release 1.0
> Cobalt OS Release 4.0
> Generic Web Administrative Interface Release 1
> RaQ2-All-Security-Point Release 2.97
> RaQ2-Security Release 1.4
> RaQ2-Security Release 2.0
> RaQ2-Security Release 2.1
> RaQ2-Security Release 2.2
> RaQ2-Security Release 2.3
> RaQ2-Security Release 2.7
> RaQ2-Security Release 2.8
> RaQ2-Security Release 2.9
> RaQ2-Security Release 2.91
> RaQ2-Security Release 2.92
> RaQ2-Security Release 2.93
> RaQ2-Security Release 2.94
> RaQ2-Update-MFG Release 2.1
> RaQ2-Update-OS Release 2.0
>
-----Original Message-----
From: cobalt-users-admin@xxxxxxxxxxxxxxx
[mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]
Sent: Thursday, April 13, 2000 12:33 AM
To: cobalt-users@xxxxxxxxxxxxxxx
Subject: cobalt-users digest, Vol 1 #634 - 22 msgs
Send cobalt-users mailing list submissions to
cobalt-users@xxxxxxxxxxxxxxx
To subscribe or unsubscribe via the web, visit
http://list.cobalt.com/mailman/listinfo/cobalt-users
or, via email, send a message with subject or body 'help' to
cobalt-users-request@xxxxxxxxxxxxxxx
You can reach the person managing the list at
cobalt-users-admin@xxxxxxxxxxxxxxx
When replying, please edit your Subject line so it is more specific than
"Re: Contents of cobalt-users digest..."
Today's Topics:
1. Re: [Qube2] how do you do virtual domains on a qube 2? (Michael
Hoennig)
2. Re: [RAQ2] New updates (Jay Falconer)
3. using another linux distribution for running a RaQ3 (fcu@no-way)
4. Re: [RAQ2] New updates (support@xxxxxxxxxxxxxxxxx)
5. RE: Installing MySql+PHP (David Zanetti)
6. RE: Mail forwarding problem on a RaQ 2 (David Zanetti)
7. [Qube2] Installing IMP webmail PKG (Benoit Perreault)
8. SSL certs on RaQ3 (Michael Martin)
9. Re: Email Problems [raq3] (Guy N. Hurst)
10. Re: [RAQ2] New updates (Gerald Waugh)
11. Re: Qube (Rob Evans)
12. RAQ2 SSL (Yohans Mendoza)
13. Re: Web based email for original QUBE (Mike Vanecek)
14. Re: Web based email for original QUBE (Rick Eames)
15. Re: [RAQ2] New updates (support@xxxxxxxxxxxxxxxxx)
16. cgi-bin folder (Michael Aronoff)
17. Re: [RAQ2] New updates (Gerald Waugh)
18. Re: Qube (Clyde McQueen)
19. Re: Which Database? (Bill Gunning)
20. Re: Which Database? (Gerald Waugh)
21. Re: RaQ3 sub domain setup? How? (=?iso-8859-1?Q?Bal=E1zs?= Nagy)
22. Re: [Qube2] Search tool (LinuxMan)
--__--__--
Message: 1
Date: Wed, 12 Apr 2000 21:50:25 +0000
From: Michael Hoennig <michael@xxxxxxxxxx>
Organization: Me organized? =?iso-8859-1?Q?You=B4re=20kiddin=B4?= - eh?
To: cobalt-users@xxxxxxxxxxxxxxx
Subject: Re: [cobalt-users] [Qube2] how do you do virtual domains on a qube
2?
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
> I have a simular question,
> If I edit the httpd.conf file on the Raq3 and add a site manualy, will the
> web-based admin over write my changes?
if you put your extra VirtualHosts in separate files and include these
("Include /etc/httpd/conf/extra.conf"), everything is fine.
> > If I modify httpd.conf the virtual domains will work, but all of hte
other
> > web based admin functions stop.
That never happend to me. But I always put extra VirtualHosts in
separate files and just use Include.
Bye
Michael
--__--__--
Message: 2
From: "Jay Falconer" <cobalt@xxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Subject: Re: [cobalt-users] [RAQ2] New updates
Date: Wed, 12 Apr 2000 10:42:57 -0700
charset="iso-8859-1"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
If cobalt is listening... maybe it's time that all of these patches and
fixes be combined into a single new RaQ2 OS release? Would make things a
whole lot easier.
Jay Falconer
"In The Q" E-Commerce System
www.InTheQ.com
----- Original Message -----
From: "Jerry Waugh" <jwaugh@xxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Wednesday, 12 April, 2000 11:34 AM
Subject: RE: [cobalt-users] [RAQ2] New updates
> Joe Kerns [SMTP:joe@xxxxxxxxxxxxx] Wrote
> On: Monday, April 10, 2000 7:17 PM
> Anyone install the latest updates? Anything get screwed up by doin
> it?
> Thanks, Joe
>
> I have these updates on mine and it runs fine!
> All-Kernel_mips Release 1.0
> All-Kernel_mips_tools Release 1.0
> Cobalt OS Release 4.0
> Generic Web Administrative Interface Release 1
> RaQ2-All-Security-Point Release 2.97
> RaQ2-Security Release 1.4
> RaQ2-Security Release 2.0
> RaQ2-Security Release 2.1
> RaQ2-Security Release 2.2
> RaQ2-Security Release 2.3
> RaQ2-Security Release 2.7
> RaQ2-Security Release 2.8
> RaQ2-Security Release 2.9
> RaQ2-Security Release 2.91
> RaQ2-Security Release 2.92
> RaQ2-Security Release 2.93
> RaQ2-Security Release 2.94
> RaQ2-Update-MFG Release 2.1
> RaQ2-Update-OS Release 2.0
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
--__--__--
Message: 3
From: "fcu@no-way" <fcu@xxxxxxxxxx>
To: cobalt-users@xxxxxxxxxxxxxxx
Reply-To: "fcu@no-way" <fcu@xxxxxxxxxx>
Date: 12 Apr 2000 22:25:56 CEST
Subject: [cobalt-users] using another linux distribution for running a RaQ3
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
hi
has anyone expirince running any linux distribution on a raq3?? i
administer such a thing and i'm really not happy with that default
installation... we don't need any of the features the cobalt soft has,
and i like to compile every additional piece of software on my own (ie,
apache, qmail, ...) or can i safly do a rm -rf /usr/* and start adding my
own stuff ?
greetz and thanks for any help
Flavio
--
-=: http://no-way.org :=-
--__--__--
Message: 4
Date: Wed, 12 Apr 2000 16:28:21 -0400
Subject: Re: [cobalt-users] [RAQ2] New updates
From: "support@xxxxxxxxxxxxxxxxx" <support@xxxxxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
when installed 2.91 all my site admin are unable to get to there virtual
root web Dir. I have yet to figure out what is wrong
Gary
--
Gary L Flaskegaard
flskgrd@xxxxxxxxxxxxxxxxx
http://www.yourwebdomain.net
phone 757-288-7860
e-fax # 603-925-9072
on 4/12/00 2:34 PM, Jerry Waugh at jwaugh@xxxxxxxxxxx wrote:
> Joe Kerns [SMTP:joe@xxxxxxxxxxxxx] Wrote
> On: Monday, April 10, 2000 7:17 PM
> Anyone install the latest updates? Anything get screwed up by doin
> it?
> Thanks, Joe
>
> I have these updates on mine and it runs fine!
> All-Kernel_mips Release 1.0
> All-Kernel_mips_tools Release 1.0
> Cobalt OS Release 4.0
> Generic Web Administrative Interface Release 1
> RaQ2-All-Security-Point Release 2.97
> RaQ2-Security Release 1.4
> RaQ2-Security Release 2.0
> RaQ2-Security Release 2.1
> RaQ2-Security Release 2.2
> RaQ2-Security Release 2.3
> RaQ2-Security Release 2.7
> RaQ2-Security Release 2.8
> RaQ2-Security Release 2.9
> RaQ2-Security Release 2.91
> RaQ2-Security Release 2.92
> RaQ2-Security Release 2.93
> RaQ2-Security Release 2.94
> RaQ2-Update-MFG Release 2.1
> RaQ2-Update-OS Release 2.0
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
--__--__--
Message: 5
From: David Zanetti <david.zanetti@xxxxxxxxxxx>
To: "'cobalt-users@xxxxxxxxxxxxxxx'" <cobalt-users@xxxxxxxxxxxxxxx>
Subject: RE: [cobalt-users] Installing MySql+PHP
Date: Thu, 13 Apr 2000 09:43:30 +1200
charset="iso-8859-1"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
On Thursday, April 13, 2000 2:40 AM, Pierre Chopot wrote:
[clip]
> The README.php3+mysql shows what 5 files to install but the
> README.mysql says :
> "The floating point support is fixed. To use floating point
> successfully,
> you must upgrade your glibc to 2.0.7-29C2 or higher."
> I am pretty new to Linux, so I would very much appreciate if
> somebody could tell me how to check that on my machine
You can check (as root) with: rpm -q glibc
--
David Zanetti, Unix System Administrator and Postmaster
Wellington City Council, New Zealand. Phone +64-4-801-3354
The light at the end of the tunnel is a train heading for you
--__--__--
Message: 6
From: David Zanetti <david.zanetti@xxxxxxxxxxx>
To: "'cobalt-users@xxxxxxxxxxxxxxx'" <cobalt-users@xxxxxxxxxxxxxxx>
Subject: RE: [cobalt-users] Mail forwarding problem on a RaQ 2
Date: Thu, 13 Apr 2000 09:48:26 +1200
charset="iso-8859-1"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
On Tuesday, April 11, 2000 3:54 PM, Bill Riner wrote:
> I'm completely stumped on this problem. Please help!!!
> Forwarding *was* working fine, but now isn't.
> In /etc/aliases I have a line:
> relay: briner@xxxxxxxxxx
[clip]
> The mail isn't fowarded to briner@xxxxxxxxxx, it's just sent
> to relay on the RaQ.
Did you rebuild the aliases database? ("newaliases" as root will do that)
--
David Zanetti, Unix System Administrator and Postmaster
Wellington City Council, New Zealand. Phone +64-4-801-3354
The light at the end of the tunnel is a train heading for you
--__--__--
Message: 7
From: "Benoit Perreault" <bperreault@xxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Date: Wed, 12 Apr 2000 18:01:52 -0400
boundary="----=_NextPart_000_0002_01BFA4A9.2E4B7A70"
Subject: [cobalt-users] [Qube2] Installing IMP webmail PKG
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
This is a multi-part message in MIME format.
------=_NextPart_000_0002_01BFA4A9.2E4B7A70
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hi,
Im trying to install the imp-1.0.mips.pkg that is on the ftp server of
cobalt. When i try to install ot I get the error message :
Problem verifing procedure imap-4.7-5.mips.rpm
I have already the imap install, and the php.
Do you have the webmail pakage only.
----
Benoit Perreault
Neve Refrigeration Inc.
1290 Labadie
Longueuil, Quebec
J4N 1C7
Tel : (450) 677-4588
Fax : (450) 677-8005
neverefrigeration@xxxxxxxxxxxxx
------=_NextPart_000_0002_01BFA4A9.2E4B7A70
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2919.3800" name=3DGENERATOR></HEAD>
<BODY>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D605175421-12042000>Hi,</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D605175421-12042000></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D605175421-12042000>Im =
trying to install=20
the imp-1.0.mips.pkg that is on the ftp server of cobalt. When i =
try to=20
install ot I get the error message :</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D605175421-12042000></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN =
class=3D605175421-12042000>Problem verifing=20
procedure imap-4.7-5.mips.rpm</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D605175421-12042000></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D605175421-12042000>I have =
already the=20
imap install, and the php.</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D605175421-12042000></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D605175421-12042000>Do you =
have the=20
webmail pakage only.</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D605175421-12042000></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>----</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Benoit Perreault</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Neve Refrigeration Inc.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>1290 Labadie</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Longueuil, Quebec</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>J4N 1C7</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tel : (450) 677-4588</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Fax : (450) 677-8005</FONT></DIV>
<DIV><FONT face=3DArial size=3D2><A=20
href=3D"mailto:neverefrigeration@xxxxxxxxxxxxx";>neverefrigeration@neveref=
.qc.ca</A></FONT></DIV>
<DIV> </DIV>
<DIV> </DIV></BODY></HTML>
------=_NextPart_000_0002_01BFA4A9.2E4B7A70--
--__--__--
Message: 8
From: "Michael Martin" <michael@xxxxxxxxxxxxxx>
To: "Cobalt Users List" <cobalt-users@xxxxxxxxxxxxxxx>
Date: Wed, 12 Apr 2000 17:02:59 -0500
charset="iso-8859-1"
Subject: [cobalt-users] SSL certs on RaQ3
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
I've been told that the RaQ3 can only have one SSL certificate per machine
and other sites that use it will have to be piped through the main domain.
Is this true? If it is, do I have to create a subdirectory in the main site
(i.e. - https://www.site1.com/site2/) for the other site that needs SSL? If
I try to run the other site through SSL (i.e. - https://www.site2.com) I get
errors about the domain name being different form the one the cert is
registered to.
Michael Martin
michael@xxxxxxxxxxxxxx
IS Director, Systems Administrator
Violet Star Studios
www.violetstar.com
--__--__--
Message: 9
Date: Wed, 12 Apr 2000 18:39:22 -0400
From: "Guy N. Hurst" <gnhurst@xxxxxxxxxxxxxx>
Organization: HurstLinks Inc.
To: cobalt-users@xxxxxxxxxxxxxxx, Jeff Lasman <jblists@xxxxxxxxxxxxx>
Subject: Re: [cobalt-users] Email Problems [raq3]
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
Hi,
This looks like the same problem we have come across lately.
We found that even though we checked off "Accept Email for Domain" for
the domain to receive email, it didn't. So we unchecked it, and
manually entered it in the hosts/domains aliases.
That seemed to make it work, but I don't feel comfortable with this
solution. It more like rolling dice to see which combination worked.
What else is affected by that checkbox, anyway?
And what is the truly 'proper' cobalt way to put IPs/domains in the
Relay and Aliases boxes of the Email Parameters administration?
This was for a virtual host on a RaQ3i. We would like this to be
more predictable before we migrate more websites.
Thanks for any help.
Guy N. Hurst
Jeff Lasman wrote:
>
> Stephen Mc Carron wrote:
>
> > Am having problems with email on a raq3. The virtual site is set up, set
to
> > receive email, the dns and mx record is fine, the domain is pointing at
the
> > correct name servers and all is well.
> >
> > Problem is that when anyone tries to send an email to one of the set-up
> > users or aliases, it bounces back with mx record errors?
>
> Those two paragraphs tend to negate each other, don't they <wry grin>.
>
> How about sending some samples. Real ones, none of this "domain.com IN
> MX foo.who.com", "foo.who.com IN A xx.yy.zz.qq" stuff <smile>.
>
> A complete copy of your /etc/httpd.conf and your zone file for the
> domain in question would be nice <smile>.
>
> Offlist, if it makes you feel better, but it really doesn't matter since
> every DNS record on the Internet is recognizable to everyone else on the
> 'net.
>
> > Any ideas?
>
> Not enough info for ideas, yet <smile>.
>
> Jeff
> --
> Jeff Lasman <jblists@xxxxxxxxxxxxx>
> nobaloney.net
> P. O. Box 52672
> Riverside, CA 92517
> voice: (909) 787-8589 * fax: (909) 782-0205
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
--__--__--
Message: 10
Reply-To: "Gerald Waugh" <gerald@xxxxxxxxx>
From: "Gerald Waugh" <gerald@xxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Subject: Re: [cobalt-users] [RAQ2] New updates
Date: Wed, 12 Apr 2000 18:14:52 -0400
charset="iso-8859-1"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
<support@xxxxxxxxxxxxxxxxx> Wrote
on: Wednesday, April 12, 2000 4:28 PM
> when installed 2.91 all my site admin are unable to get to there
virtual
> root web Dir. I have yet to figure out what is wrong
>
Did you install the updates in numerical order?
Some updates only work correctly when the previous updates are installed!
--__--__--
Message: 11
From: "Rob Evans" <robe@xxxxxxxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Subject: Re: [cobalt-users] Qube
Date: Thu, 13 Apr 2000 09:24:55 +1000
Organization: Fujitsu Australia Software Technology
charset="iso-8859-1"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
----- Original Message -----
From: "Randall Clark" <wz297@xxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Wednesday, 12 April 2000 09:34
Subject: [cobalt-users] Qube
> Does anyone on this list have a Qube??
>
> Randall Clark
We have a Qube 2700WG, which is used as our mail server. An important
feature of the mail service for us is the ability to forward mail and keep a
copy on the server. I'd like to do other things with it, such as run an
LDAP service and DHCP, but am hesitant about installing these, due to my
inexperience with Linux, Perl, etc. - I'm learning more as I have
opportunity, given my other responsibilities.
We also have a Qube2, which is used only as an FTP server outside our
firewall - I know it has many improved features over the 2700WG, including a
DHCP server. I'd like to swap the machines, but the Qube2 falls down on not
being able to forward mail and keep a copy on the server.
And, in my testing of the Qube2, I was not happy with the way it handled
mail to groups and mailing lists. I've gathered from this "cobalt-users"
list that I needed to be patient, ie. wait for half-an-hour for it to be
delivered - not really acceptable after not having to wait with the 2700WG.
And then, I gather, the reply address for those is not the sender, but the
group or mailing list - again, not acceptable. Mail clients allow "reply to
all" to get the latter effect - but that causes problems when the reply
address is not the sender, as noted many times in the past by this
"cobalt-users" list.
Regards, Rob Evans
_______________________________________________________
Phone: (02) 9452 9129 Fax: (02) 9975 2899
E-mail: robe@xxxxxxxxxxxxxxxxxxx
Address: Fujitsu Australia Software Technology Pty Ltd,
Floor 2, 14 Rodborough Road, Frenchs Forest NSW 2086
_______ www.fastware.com ________________________________
--__--__--
Message: 12
Date: Wed, 12 Apr 2000 17:26:09 -0600 (MDT)
From: Yohans Mendoza <yohans@xxxxxxxxxxxxxxxxxxxxxxxxxx>
To: cobalt-users@xxxxxxxxxxxxx
Subject: [cobalt-users] RAQ2 SSL
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
hi all,
I've been browsing the cobalt list in search for this answer. I've seen
the qestion being asked several times, but no answer.
Maybe somebody got it working, the question is:
I installed SSL on a rqa2 for our main site, and it works really good, now
I got a certificate for a virtual site, but I haven't been able to
configure the virtual site for the secure server.
any pointers in how to do this is greatly appreciated.
TIA
--Yohans
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Yohans Mendoza Unix Administrator
yohans@xxxxxxxxxxxxxxxxx Sirius Images Inc.
http://www2.utep.edu/~yohans http://www.sirius-images.net
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--__--__--
Message: 13
From: Mike Vanecek <nospam99@xxxxxxxxxxxx>
To: cobalt-users@xxxxxxxxxxxxxxx
Subject: Re: [cobalt-users] Web based email for original QUBE
Date: Wed, 12 Apr 2000 18:58:31 -0500
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
On Wed, 12 Apr 2000 08:59:07 -0700, Rick Eames <athos@xxxxxxxxxxxxx> wrote:
:>on 4/11/00 7:44 PM, Mike Vanecek at nospam99@xxxxxxxxxxxx wrote:
:>
:>> BTW, in
:>>> From: "Oren Teich" <teich@xxxxxxxxxx>
:>>
:>>> To: <cobalt-users@xxxxxxxxxxxxxxx>
:>>> Subject: [cobalt-users] IMP webmail PKG file now available
:>>> Date: Thu, 6 Apr 2000 14:19:44 -0700
:>>
:>> said
:>>
:>>> I have made a PKG file for horde/imp available at:
:>> ftp://ftp.cobaltnet.com/pub/experimental/imp-1.0.mips.pkg
:>
:>I tried it, and my Qube says that the package file is not a real package
:>file, oddly enough.
:>
:>Rick
Do you have a Qube or Qube2? As I remember from Oren's full message, the pkg
is ONLY for the Qube2.
--__--__--
Message: 14
Date: Wed, 12 Apr 2000 17:04:49 -0700
Subject: Re: [cobalt-users] Web based email for original QUBE
From: Rick Eames <athos@xxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
on 4/12/00 4:58 PM, Mike Vanecek at nospam99@xxxxxxxxxxxx wrote:
> Do you have a Qube or Qube2? As I remember from Oren's full message, the
pkg
> is ONLY for the Qube2.
That's right but if you look at the subject, I asked about the ORIGINAL
qube, so your response pointing me to the solution for the QUBE2 was
confusing to me.
Rick
--__--__--
Message: 15
Date: Wed, 12 Apr 2000 20:52:01 -0400
Subject: Re: [cobalt-users] [RAQ2] New updates
From: "support@xxxxxxxxxxxxxxxxx" <support@xxxxxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
in exact order
on 4/12/00 6:14 PM, Gerald Waugh at gerald@xxxxxxxxx wrote:
>
> <support@xxxxxxxxxxxxxxxxx> Wrote
> on: Wednesday, April 12, 2000 4:28 PM
>
>> when installed 2.91 all my site admin are unable to get to there
virtual
>> root web Dir. I have yet to figure out what is wrong
>>
> Did you install the updates in numerical order?
> Some updates only work correctly when the previous updates are installed!
>
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
--__--__--
Message: 16
From: "Michael Aronoff" <ma@xxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Date: Wed, 12 Apr 2000 17:50:41 -0700
charset="iso-8859-1"
Subject: [cobalt-users] cgi-bin folder
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
Is it possible to turn of Automatic Indexes on a per folder basis with
.htaccess?
I have cgi-bin folders on various sites am I don't want people be able to
browse that folder.
Thanks
Michael Aronoff Out
ma@xxxxxxxx
Calabasas, CA
--__--__--
Message: 17
Reply-To: "Gerald Waugh" <gerald@xxxxxxxxx>
From: "Gerald Waugh" <gerald@xxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Subject: Re: [cobalt-users] [RAQ2] New updates
Date: Wed, 12 Apr 2000 20:55:29 -0400
charset="iso-8859-1"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
<support@xxxxxxxxxxxxxxxxx> wrote
ON: Wednesday, April 12, 2000 8:52 PM
> in exact order
> on 4/12/00 6:14 PM, Gerald Waugh at gerald@xxxxxxxxx wrote:
> Did you install the updates in numerical order?
> Some updates only work correctly when the previous updates are installed!
Just trying to help out :-).
Sometimes it is easy to overlook the obvious.
My updates worked fiine, I'll keep thinking abiut your problem!
--__--__--
Message: 18
From: "Clyde McQueen" <mcqueen@xxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Subject: Re: [cobalt-users] Qube
Date: Wed, 12 Apr 2000 19:42:24 -0700
boundary="----=_NextPart_000_01DF_01BFA4B7.39968740"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
This is a multi-part message in MIME format.
------=_NextPart_000_01DF_01BFA4B7.39968740
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Yup.
I filter out everything that doesn't have a "Q" on the subject line. =
Saves buckets of time.
/Clyde
----- Original Message -----=20
From: Randall Clark=20
To: cobalt-users@xxxxxxxxxxxxxxx=20
Sent: Tuesday, April 11, 2000 4:34 PM
Subject: [cobalt-users] Qube
Does anyone on this list have a Qube??
Randall Clark
_______________________________________________
cobalt-users mailing list
cobalt-users@xxxxxxxxxxxxxxx
To Subscribe or Unsubscribe, please go to:
http://list.cobalt.com/mailman/listinfo/cobalt-users
------=_NextPart_000_01DF_01BFA4B7.39968740
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.3013.2600" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3D"Trebuchet MS">Yup.</FONT></DIV>
<DIV><FONT face=3D"Trebuchet MS"></FONT> </DIV>
<DIV><FONT face=3D"Trebuchet MS">I filter out everything that doesn't =
have a "Q"=20
on the subject line. Saves buckets of time.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3D"Trebuchet MS">/Clyde</FONT></DIV>
<BLOCKQUOTE=20
style=3D"BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A href=3D"mailto:wz297@xxxxxxxxxxxxxx"; =
title=3Dwz297@xxxxxxxxxxxxxx>Randall=20
Clark</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A=20
href=3D"mailto:cobalt-users@xxxxxxxxxxxxxxx"=20
title=3Dcobalt-users@xxxxxxxxxxxxxxx>cobalt-users@xxxxxxxxxxxxxxx</A> =
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, April 11, 2000 =
4:34=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> [cobalt-users] =
Qube</DIV>
<DIV><BR></DIV>Does anyone on this list have a Qube??<BR><BR>Randall=20
=
Clark<BR><BR><BR>_______________________________________________<BR>cobal=
t-users=20
mailing list<BR><A=20
=
href=3D"mailto:cobalt-users@xxxxxxxxxxxxxxx";>cobalt-users@xxxxxxxxxxxxxxx=
</A><BR>To=20
Subscribe or Unsubscribe, please go to:<BR><A=20
=
href=3D"http://list.cobalt.com/mailman/listinfo/cobalt-users";>http://list=
.cobalt.com/mailman/listinfo/cobalt-users</A><BR></BLOCKQUOTE></BODY></HT=
ML>
------=_NextPart_000_01DF_01BFA4B7.39968740--
--__--__--
Message: 19
Date: Wed, 12 Apr 2000 23:14:34 -0400
To: cobalt-users@xxxxxxxxxxxxxxx
From: Bill Gunning <billgun@xxxxxxxxxxxxxxxxx>
Subject: Re: [cobalt-users] Which Database?
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
I installed mySQL, but in order to get DBI and mysql.pm
working I needed to load the source and rebuild it...
But for the most part I like mySQL and it seams to
work we'll on my RaQ3
rpm --rebuild /home/sites/home/MySQL-3.22.32-1.src.rpm
rpm -Uvh --force /usr/src/redhat/RPMS/i386/MySQL-3.22.32-1.i386.rpm
rpm -Uvh --force /usr/src/redhat/RPMS/i386/MySQL-client-3.22.32-1.i386.rpm
rpm -Uvh --force /usr/src/redhat/RPMS/i386/MySQL-devel-3.22.32-1.i386.rpm
rpm -Uvh --force /usr/src/redhat/RPMS/i386/MySQL-shared-3.22.32-1.i386.rpm
Bill
At 05:38 PM 4/11/00 +1000, you wrote:
>Hello all,
>
>I was wondering if anyone could advise on the best database...for the RaQ3
>platform.
>
>I am aware of and have some experience with MySQL, but I am interested in
>other peoples experiences with more commercial databases as well.
>
>Thanks in advance
>
>Mark Buchanan
>
>
>
>
>
>
>_______________________________________________
>cobalt-users mailing list
>cobalt-users@xxxxxxxxxxxxxxx
>To Subscribe or Unsubscribe, please go to:
>http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>
--__--__--
Message: 20
Reply-To: "Gerald Waugh" <gerald@xxxxxxxxx>
From: "Gerald Waugh" <gerald@xxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Subject: Re: [cobalt-users] Which Database?
Date: Wed, 12 Apr 2000 23:04:17 -0400
charset="iso-8859-1"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
> >Mark Buchanan wrote
> >I was wondering if anyone could advise on the best database...for the
RaQ3
> >platform.
> >
> >I am aware of and have some experience with MySQL, but I am interested in
> >other peoples experiences with more commercial databases as well.
> >Thanks in advance
> >
A few days ago, the message is in the archive.
Someone form Cobalt promised to release an installation package for Oracle.
Hope that helps some! I use PostgreSQL as it is already on the RaQ.
--__--__--
Message: 21
Date: Wed, 12 Apr 2000 22:15:03 -0600
From: =?iso-8859-1?Q?Bal=E1zs?= Nagy <bn@xxxxxxxxxxxxxx>
To: cobalt-users@xxxxxxxxxxxxxxx
Subject: Re: [cobalt-users] RaQ3 sub domain setup? How?
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
Barnabas Toth wrote:
> I'm new to my RaQ3 and I was wondering if anyone can give me some step by
> step directions on how I can setup sub domains on my RaQ3 and if a sub
> domain needs IPs or anything like that.
You can set them up through the GUI, whithout any problems, just like
another
site. Instead of "www" you just need to give another host/subdomain name.
You
can also use the same IP for all subdomains if you would like to.
--__--__--
Message: 22
From: "LinuxMan" <linuxman@xxxxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Subject: Re: [cobalt-users] [Qube2] Search tool
Date: Thu, 13 Apr 2000 00:33:32 -0700
charset="iso-8859-1"
Reply-To: cobalt-users@xxxxxxxxxxxxxxx
I have a shareware .pl script that can search a web site, If thats what you
need, e-mail me at linuxman@xxxxxxxxxxxxxxxx
----- Original Message -----
From: Aaron Bahmer <abahmer@xxxxxxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Wednesday, April 12, 2000 7:34 AM
Subject: [cobalt-users] [Qube2] Search tool
> I posted this yesterday but never saw it again...
>
> Does anyone know how I can configure my own web page to use
> the Qube's internal search engine?
>
>
> Aaron Bahmer
> Computer Science & Applications
> Eastern Wyoming College
> (307) 532-8284
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
--__--__--
_______________________________________________
cobalt-users mailing list
cobalt-users@xxxxxxxxxxxxxxx
http://list.cobalt.com/mailman/listinfo/cobalt-users
End of cobalt-users Digest