RE: [cobalt-developers] mail problem

["Paul Johnson" <pfj@xxxxxxxxxxx>]

(Chiming in) 

We've had pretty consistent problems on our Raq-4's with domains giving
this error until we manually enter them in the list under the main
control panel.  

We use separate (non-Cobalt) DNS servers and know that DNS is set up
correctly in each case and our Raq-4's are always patched to current
updates.  Manually adding the domain to the email control panel list
always fixes the problem.

Something must be broken in the Raq-4 site admin GUI scripts. 

Our Raq-3's have never had this problem, but we've had to add a
procedure to our site setup checklist to verify that the domain shows up
under the control panel on the Raq-4's after we set them up. Extra work
but seems to be necessary.

While on the subject of Sendmail, anybody know when PkgMaster.com will
have updates to Sendmail 8.9.3-PM2 and Sendmail 8.10.2-PM2 to address
the latest security issue?

Thx,
Paul 

-----Original Message-----
From: cobalt-developers-admin@xxxxxxxxxxxxxxx
[mailto:cobalt-developers-admin@xxxxxxxxxxxxxxx] On Behalf Of
Pete@EndCORP
Sent: Monday, April 07, 2003 10:56 AM
To: cobalt-developers@xxxxxxxxxxxxxxx
Subject: Re: [cobalt-developers] mail problem


I have seen this message for either of two reasons:
1) the DNS pointer for the mail server is a CNAME, remove and make it an
"A" address.
2) in the email settings of the control panel the domain is not set to
receive mail, add to list.

Hope this helps?

Pete
----- Original Message -----
From: "Anthony Noe" <anthony@xxxxxxxxxx>
To: <cobalt-developers@xxxxxxxxxxxxxxx>
Sent: Monday, April 07, 2003 10:30 AM
Subject: [cobalt-developers] mail problem


>
> I have a raq4 in which I have set up many virtual sitea.  However, the

> latest one I have setup I am getting errors when trying to send email 
> to
the
> accounts.  Error is as follows:
>
> ----- Transcript of session follows -----
> 553 5.3.5 mail.domain.com. config error: mail loops back to me (MX
problem?)
> 554 5.3.5 <user@xxxxxxxxxx>... Local configuration error
>
> Setup is as follows:
> domain.com   ->   216.26.140.202
> mail.domain.com   ->    216.26.140.202
> www.domain.com   ->   216.26.140.202
> 216.26.140.202/24   ->   www.domain.com
> domain.com   mail is sent to the High priority mail server
mail.domain.com
>
> Are the any setting I can look at thru command line that might help?
>
> Thanks
> Anthony
>
>
> _______________________________________________
> cobalt-developers mailing list cobalt-developers@xxxxxxxxxxxxxxx
> http://list.cobalt.com/mailman/listinfo/cobalt-developers
>

_______________________________________________
cobalt-developers mailing list cobalt-developers@xxxxxxxxxxxxxxx
http://list.cobalt.com/mailman/listinfo/cobalt-developers